Our offer

• Weightca. 90 g / m ²
• Vapour permeability 40 g / m ² / 24
• Coefficient Sdca. 1 m
• UV resistance2 months *
• WaterproofnessW2
• Dimensions of the roll1.5 mx 50 m = 75 m ²
• Pallet containing100 rolls
• * UV resistance for up to 2 months based on a laboratory simulation of an artificial ageing process in average annual sun exposure conditions in a central European climate.

It is suitable as initial roofing for sloping ventilated roofs without thermal insulation. When used for the construction of thermally insulated roofs, the product requires leaving a ventilation gap of at least 5cm between the membrane and the thermal insulation (mineral wool, glass wool, etc.), which means the membrane cannot touch the thermal insulation directly. The product should not be used for fully-boarded roofs. Installation of the final roof covering on the top of the roofing membrane should always be done using a batten and a counter batten.

• Weightca. 90 g / m ²
• Vapour permeability1 g / m ² / 24
• Coefficient Sdca. 40 m
• UV resistance2 months *
• WaterproofnessW1
• Dimensions of the roll 1.5 mx 50 m = 75 m ²
• Pallet containing 100 rolls
• * UV resistance for up to 2 months based on a laboratory simulation of an artificial ageing process in average annual sun exposure conditions in a central European climate.

It can be used as a vapour barrier membrane, protecting against water vapour and moisture penetration in sloping and flat roofs, as well as vertical wall constructions. It can be installed parallel or along rafters, directly onto thermal insulation.

• Weightca. 0.15 mm
• Vapour permeabilityca. 1%
• Coefficient Sdca. 50 m
• UV resistanceup to 2 months *
• WaterproofnessW1
• Dimensions of the roll2 mx 50 m = 100 m ²
• Pallet containing80 rolls
• * UV resistance for up to 2 months based on a laboratory simulation of an artificial ageing process in average annual sun exposure conditions in a central European climate.

It is primarily suitable as an insulation layer regulating the level of the water vapour within the construction of the walls, floors, roofs and ceilings. Used also as an acoustic insulation and protection under-floor finishes, such as floor panels. Because of its mechanical properties, it can be used as a protective film for construction materials, window woodwork, roof slopes or façades during assembly and finishing works.

• Weightca. 90; 110; 150; 170 g / m ²
• Vapour permeability0.1 g / m ² / 24
• Coefficient Sdca. 150 m
• UV resistanceup to 2 months *
• WaterproofnessW1
• Dimensions of the roll1.5 mx 50 m = 75 m ²
• Pallet containing100 rolls
• * UV resistance for up to 2 months based on a laboratory simulation of an artificial ageing process in average annual sun exposure conditions in a central European climate.

It is primarily suitable as an insulation layer regulating the level of the water vapour within the construction of the walls, floors, lofts, roofs and ceilings. Used also as an acoustic insulation and protection under floor finishes, such as for example, floor panels.

• SUPERNOVA ALU 90 Download
• SUPERNOVA ALU 110 Download